Aoip markalı, ürün kodu CALYS 75 olan Aoip CALYS 75 Field Documenting Multifunction Calibrator ürününün fiyat ve detaylarını aşağıda inceleyebilirsiniz. Teklif almak için online teklif formunu doldurunuz.
Detaylı Bilgi - Aoip CALYS 75 Field Documenting Multifunction Calibrator Field Documenting Multifunction Calibrator
CALYS 75 is a field documenting multifunction calibrator of high accuracywithin CALYS range. It is the perfect tool for advanced process maintenance anduse on test bench in all industries. Suitable for all field and labmeasurements, it can simultaneously measure and generate over two isolatedchannels various signals of temperature, resistance, process, pressure andfrequency in one single instrument.
Providing extended functionalities (temperaturesimulation, scaling, steps, synthesizer, statistical functions…), CALYS 75makes advanced data exploitation and full data traceability easier, as well asquick access to functions by menus.
The instrument simultaneously measures and simulates:
·Temperature: Up to 0,014% RDG
·Resistance: Up to 0,012% RDG, 4 K? range
·Current: Up to 0,0175% RDG, 50 mA range+ 24 V loop supply
·Voltage: Up to 0,013% RDG, 50 V range
·Frequency: Up to 0,005% RDG, 20 KHzrange (10 KHz in simulation)
·When used with an external pressuremodule (ref. ACL433), CALYS 75 can measure and simulate pressure (comparisoncalibration with a pressure pump).
Using this user-friendly instrument, calibration tasks can be quickly carriedout over the whole process chain. Take the 900 g documenting process calibratorto the field with you during the whole week with 10 calibration proceduresstored in the device. Run the procedure after connecting the probes tothe instrument (Easy connect system®) and save the results for onsite easy andquick calibration. Back to the office, you can then upload the data on acomputer in order to issue customized calibration certificates withdedicated calibration software DATACAL.
IP 54, fully protected by an antichoc rubber holster, CALYS 75 integrates\"easyconnect\" terminals and a wide backlite display that makes iteasy to use in any severe or dark conditions.
Easy connection system
Connect your probes bysimply pushing on the terminal top and insert wires of up to 3 mm or 10 AWGdiameter and compensated thermocouple connectors.
Wires are held tight between two brass plates ensuring thermal stabilityand a very good cold junction compensation for thermocouples.
This system also enables 4 mm banana plugs and security connectors to beconnected on the terminal top.
CALYS series, 4 models from basic use to advanced performances
Thermocouples (14) RTDs (12)
0.013% RDG for Tc K 0.012% RDG
0.01% RDG for Tc K 0.01% RDG
0.005% RDG for Tc K 0.006% RDG
DC current + Loop supply 24 V
50 mA 0.0175% RDG
100 mA 0.007% RDG
50 V IN / 20 V OUT 0.013% RDG
50 V 0.013% RDG
50 V 0.010% RDG
50 V 0.005% RDG
20 KHz IN / 10 KHz OUT 0.005% RDG
100 KHz 0.01% RDG
4000 ? 0.012% RDG
4000 ? 0.010% RDG
50 K? 0.006% RDG
Relative pressure: 30 bar / Absolute pressure: 1,000 bar 0.05% RDG
Compliance to standards
21 CFR Part 11
NADCAP Heat treatment AMS 2750
Advanced data exploitation: Scaling, relative measurement, simulation of ramps and steps, synthetizer, square root, statistical functions Transmitter function
Switch test Calibration of transmitters
Comparison calibration HART: Digital calibration and data transfer Calibration of thermistors
DATACAL calibration software for configuration and data management
10,000 data stored and recalled on screen as curve or list