Standardized
chemical pump in plastic
Pumps of the
CPDR and CPRF
type family are
horizontal, single-stage, end-suction, top-discharge centrifugal pumps, standardized to EN 22858
(formerly DIN 24256;
ISO 2858, NF 44-121, BS 5257 and ISO 5199).
The
installation length of type CPRF is simply longer
about the channel width
so that a free passage
for the fluid
is given. The pumps are used for handling chemically aggressive and/or inflammable liquids within the wide field of
chemical processing and environmental technology. The CPDR with
open impeller is foreseen for
clean liquids and fluids with a small content
of solids. The CPRF (Free
Flow) is able to handle fluids
with larger solids.
Both types are possible in close-coupled design instead of bearing block.
• Capacities to 200 m³/h | 880 GPM
• Heads to 100 m | 328 ft
• Temperature ranges from
-40 °C to 190 °C | -40 °F to 374 °F
• Pressures to 16 bar | 232 PSIG
Applications:
• Brine
• Chemical Wastewater
• Chloralkali
• Flue
gas scrubbers
• Waste
incineration plants
• Hydrochloric acid
• Sea water
• Steel industry
• Sulphuric acid
Materials:
• PP
• PE 1000
• PE 1000R
• PVDF
• PTFE
