Product description
The valve will be installed in vertical position perfectly aligned with the actuator.
Must be avoid stresses in the body of the valve, because of an incorrect aligned with the discharge pipe.
Is not necessary any specific instructions for the operation of the valve. The valve will be opened an closed,
Slowly or quickly. Obviously, must be avoid any excessive effort.
The valves are appropriated for regulation as the stroke can be regulated in any intermediate position
Utilization
La válvula telescópica, tal y como la compuerta de rebose, se utiliza para controlar el nivel de fluidos almacenados.
También se utiliza para evacuar mediante rebose las posible espumas y solidos que se acumulen en la parte superior de los liquidos.
Sizes
From DN50 up to DN1500 (larger sizes on request). Check with C.M.O. for the general dimensions of a TE telescopic valve.
Working pressures
Maximum working pressure depends on the valve stroke and is equal to the difference between the maximum and minimum level required for the pond.These units adapt to the customer’s requirements in each project, and are designed to meet the working conditions in the final location.
Directives
• Pressure Equipment Directive:
(PED) ART 4.3 /CAT.1.
• Potential Explosive Atmospheres Directive:
(ATEX) CAT.3 ZONA 2 y 22 GD.
